Conn#2 and #3 mouthpieces
-
- Posts: 589
- Joined: Thu Jan 17, 2019 7:45 am
Conn#2 and #3 mouthpieces
Does anyone know the difference between a Conn 2 and a Conn 3 mouthpiece?
- BGuttman
- Posts: 6370
- Joined: Thu Mar 22, 2018 7:19 am
- Location: Cow Hampshire
Re: Conn#2 and #3 mouthpieces
2 is a little bigger.
Don't have exact measurements, though.
Don't have exact measurements, though.
Bruce Guttman
Merrimack Valley Philharmonic Orchestra
"Almost Professional"
Merrimack Valley Philharmonic Orchestra
"Almost Professional"
-
- Posts: 589
- Joined: Thu Jan 17, 2019 7:45 am
Re: Conn#2 and #3 mouthpieces
6 1/2 AL equivalent range?
- heinzgries
- Posts: 236
- Joined: Tue Apr 24, 2018 4:52 pm
- Location: Heidelberg/germany
Re: Conn#2 and #3 mouthpieces
the Conn 3 throat is 6,4 mm
-
- Posts: 3982
- Joined: Fri Mar 23, 2018 9:54 pm
- Location: California
Re: Conn#2 and #3 mouthpieces
I think Bruce has it backwards.
My Conn 3: ~25.0 mm Cup I.D,; 6.35mm throat (measured)
Conn 2 (per spec): ~24.5mm Cup I.D.; 6.35mm throat
So:
• Conn 3 is sort of like a Bach 6¾C but with a deeper, more V-shaped cup and a larger throat;
• Conn 2 is sort of like a Bach 7 but with a deeper, more V-shaped cup and a larger throat.
Apparently the elusive Conn Remington small-shank is larger yet than the Conn 3.
(Similar to the large-shank Remington: 25.65mm Cup I.D; 6.15mm throat?)
I am told these were supplied with the Conn 79H and 78H trombones.
If anyone has a small-shank Remington for sale, I'd like to own it!
My Conn 3: ~25.0 mm Cup I.D,; 6.35mm throat (measured)
Conn 2 (per spec): ~24.5mm Cup I.D.; 6.35mm throat
So:
• Conn 3 is sort of like a Bach 6¾C but with a deeper, more V-shaped cup and a larger throat;
• Conn 2 is sort of like a Bach 7 but with a deeper, more V-shaped cup and a larger throat.
Apparently the elusive Conn Remington small-shank is larger yet than the Conn 3.
(Similar to the large-shank Remington: 25.65mm Cup I.D; 6.15mm throat?)
I am told these were supplied with the Conn 79H and 78H trombones.
If anyone has a small-shank Remington for sale, I'd like to own it!
-
- Posts: 589
- Joined: Thu Jan 17, 2019 7:45 am
Re: Conn#2 and #3 mouthpieces
Thanks!
-
- Posts: 397
- Joined: Mon Jan 07, 2019 8:56 pm
Re: Conn#2 and #3 mouthpieces
Conn Loyalist has info on both Precision https://cderksen.home.xs4all.nl/ConnMpcPrecision.html and Improved Precision https://cderksen.home.xs4all.nl/ConnMpc ... ision.html mouthpieces. There does not appear to be a linear comparison among Conn mouthpieces; each number designation has a different character and purpose, rather than going from step to step to step, as we see (sometimes incorrectly) in other brands.
Current instruments:
Olds Studio trombone, 3 trumpets, 1 flugelhorn, 1 cornet, 1 shofar, 1 keyboard
Previous trombones:
Selmer Bundy, Marceau
Olds Studio trombone, 3 trumpets, 1 flugelhorn, 1 cornet, 1 shofar, 1 keyboard
Previous trombones:
Selmer Bundy, Marceau
-
- Posts: 3982
- Joined: Fri Mar 23, 2018 9:54 pm
- Location: California
Re: Conn#2 and #3 mouthpieces
Conn Loyalist / Derksen's not much help, since it refers only to mouthpieces produced from ~1932 to ~1964. Conn was likely producing the Conn 3 more recently than that - I own one and have played another - probably from no earlier than the mid 70s (though I don't know for sure). At any rate, the information clearly shows that the larger Conn tenor trombone mouthpieces had higher numbers (i.e, that a Conn 3 is larger than a Conn 2). As previously noted, the Conn 3 has a cup I.D. of about 25.0 mm, a fairly deep v-shaped cup, and a 6.35mm throat (larger than Bach mouthpieces of similar size).
The more recent Conn tenor trombone mouthpieces seem to follow the Bach conventions - I have a Conn 12C and a Conn 7C that are similar to their Bach counterparts.
The more recent Conn tenor trombone mouthpieces seem to follow the Bach conventions - I have a Conn 12C and a Conn 7C that are similar to their Bach counterparts.