Well, I did what I vowed to never do again: I bought another silver plated euph.
Any tips for reducing tarnish? Is there some chemical solution I can impregnate the inside of the gig bag with? Should I keep it in the case or out? Any thoughts are greatly appreciated!
Preventing tarnish
-
- Posts: 510
- Joined: Sun Jul 28, 2019 9:35 pm
- Location: New England
Preventing tarnish
Kris Danielsen D.M.A.
Westfield State University and Keene State College
Lecturer of Low Brass
Principal Trombone, New England Repertory Orchestra
2nd Trombone, Glens Falls Symphony
Westfield State University and Keene State College
Lecturer of Low Brass
Principal Trombone, New England Repertory Orchestra
2nd Trombone, Glens Falls Symphony
-
- Posts: 370
- Joined: Thu Oct 19, 2023 8:01 pm
- Location: USA
Re: Preventing tarnish
Well, my experience is that after being in the case for years, almost no tarnhish developed. But after being left out of the case for a few days, lots of tarnish. I suspect Yamaha put something in the lining.
- ghmerrill
- Posts: 999
- Joined: Mon Apr 02, 2018 4:41 pm
- Location: Central North Carolina
Re: Preventing tarnish
I think the generic advice on this is to use one or another form of Haggerty's Silversmith Polish. It contains a tarnish preventative. Most of the people on Dave Werden's forum (https://www.dwerden.com/forum/forum.php) seem to use it on their silver instruments. I tried just about everything and use it on my 100 year old tuba, and it's been the best for me. For in between touchups I use a silver polishing cloth (I think Selmer?). But I wouldn't have another silver instrument.
Gary Merrill
Amati Oval Euph
1924 Buescher 3-valve Eb tuba
Schiller American Heritage 7B clone bass trombone
M/K nickel MV50 leadpipe
DE LB K/K8/110 Lexan
1947 Olds "Standard" trombone (Bach 12c)
Amati Oval Euph
1924 Buescher 3-valve Eb tuba
Schiller American Heritage 7B clone bass trombone
M/K nickel MV50 leadpipe
DE LB K/K8/110 Lexan
1947 Olds "Standard" trombone (Bach 12c)
- ithinknot
- Posts: 1111
- Joined: Fri Jul 24, 2020 3:40 pm
Re: Preventing tarnish
Anti-tarnish strips work if you replace them on schedule.
I leave a few in my Mouthpiece Cases of Shame, and they seem to do the trick. The pieces on my shelf tarnish much more rapidly, what with all the brimstone nowadays
I leave a few in my Mouthpiece Cases of Shame, and they seem to do the trick. The pieces on my shelf tarnish much more rapidly, what with all the brimstone nowadays
- heldenbone
- Posts: 174
- Joined: Tue Aug 21, 2018 9:17 pm
- Location: Ohio
Re: Preventing tarnish
A quick wipe-down with SimpleCoat seals porous metals and stone like copper, silver, bronze, and granite. It has worked marvelously to preserve some trumpet leadpipes that were just beginning to de-zinc. Clean and wipe down (in and out for a leadpipe) stopped the deterioration and tarnish entirely.
--
Richard
Richard
-
- Posts: 234
- Joined: Tue Jul 17, 2018 5:15 am
Re: Preventing tarnish
Got two words for you: Pacific Silvercloth. (You can get it at just about any fabric store.)
I made a silvercloth bag for my euph when I bought it in 2008 and kept my euph in it for the first couple of years. I stopped putting it in the bag in late 2010/early 2011 and simply keep it in the case and lay my horn on it when I put it away. (I close the top of the case but do not zip it unless I'm taking it to a gig.) It's been at least 10 years since I've had to polish it, which is saying something since I have a gas furnace, gas hot water heater, gas stove, and gas fireplace. (My silverplated mouthpieces, however, which are stored in a desk drawer, all have interesting patinas.)
I made a silvercloth bag for my euph when I bought it in 2008 and kept my euph in it for the first couple of years. I stopped putting it in the bag in late 2010/early 2011 and simply keep it in the case and lay my horn on it when I put it away. (I close the top of the case but do not zip it unless I'm taking it to a gig.) It's been at least 10 years since I've had to polish it, which is saying something since I have a gas furnace, gas hot water heater, gas stove, and gas fireplace. (My silverplated mouthpieces, however, which are stored in a desk drawer, all have interesting patinas.)
-
- Posts: 510
- Joined: Sun Jul 28, 2019 9:35 pm
- Location: New England
Re: Preventing tarnish
I bought that a little while ago! Haven’t turned it into a sack yet. Glad to know im on the right track!!sungfw wrote: ↑Thu Apr 18, 2024 5:58 pm Got two words for you: Pacific Silvercloth. (You can get it at just about any fabric store.)
I made a silvercloth bag for my euph when I bought it in 2008 and kept my euph in it for the first couple of years. I stopped putting it in the bag in late 2010/early 2011 and simply keep it in the case and lay my horn on it when I put it away. (I close the top of the case but do not zip it unless I'm taking it to a gig.) It's been at least 10 years since I've had to polish it, which is saying something since I have a gas furnace, gas hot water heater, gas stove, and gas fireplace. (My silverplated mouthpieces, however, which are stored in a desk drawer, all have interesting patinas.)
Kris Danielsen D.M.A.
Westfield State University and Keene State College
Lecturer of Low Brass
Principal Trombone, New England Repertory Orchestra
2nd Trombone, Glens Falls Symphony
Westfield State University and Keene State College
Lecturer of Low Brass
Principal Trombone, New England Repertory Orchestra
2nd Trombone, Glens Falls Symphony