Techs In The Atlanta Area

Post Reply
TomRiker
Posts: 41
Joined: Tue Jul 14, 2020 8:48 am
Location: Atlanta Area

Techs In The Atlanta Area

Post by TomRiker »

Apologies if this is the wrong forum for this question. I just purchased a used modular tenor trombone. the braces no longer perfectly line up with the bell. It's about a millimeter off. Meaning if the lower brace is in its bell socket the top brace is just off center with its socket and won't fit without slightly bending the brace or the bell. Since I removed the valve section from the bell I have NOT done this. I suspect the horn fell at some point causing the misalignment. I may be the first person to take the instrument apart since that happened, and I don't want to make things worse. I'd prefer not to have to ship the horn to a tech if possible but I have only been in Atlanta for less than a year and didn't have any trombones until recently so I have no idea if there are any good techs here. I'd think there would be since there are so many high schools and colleges here. Anyone have any suggestions?
Elow
Posts: 1879
Joined: Mon Mar 02, 2020 6:18 am

Re: Techs In The Atlanta Area

Post by Elow »

I believe whoever did the original work had to make compromises because they did not replace the gooseneck and the original 42 gooseneck is too short for the modification that was done.
User avatar
Matt K
Verified
Posts: 4295
Joined: Tue Mar 20, 2018 10:34 pm
Contact:

Re: Techs In The Atlanta Area

Post by Matt K »

That should be a pretty easy fix.

I'm not so sure they would have necessarily had to make compromises. I had a straight 42 that I added a valve to and the tech I used just cut the portion of the pipe where the valve went and then re-tapered the neck pipe. That was a great playing Bach.
Elow
Posts: 1879
Joined: Mon Mar 02, 2020 6:18 am

Re: Techs In The Atlanta Area

Post by Elow »

The tech used a shires part which adds a little length to the bell that wasn’t originally there so the brace doesn’t line up to the ferrule on the tuning slide tube.
Rich ita in marietta should be able to do the work
User avatar
Matt K
Verified
Posts: 4295
Joined: Tue Mar 20, 2018 10:34 pm
Contact:

Re: Techs In The Atlanta Area

Post by Matt K »

Oh I gothca you know specifically of the history of this horn, that makes sense.
calcbone
Posts: 200
Joined: Mon Jun 11, 2018 5:51 am
Location: Georgia, USA

Re: Techs In The Atlanta Area

Post by calcbone »

What Elow said:

https://www.brassinstrumentworkshop.com/

Rich Ita is top-notch.
TomRiker
Posts: 41
Joined: Tue Jul 14, 2020 8:48 am
Location: Atlanta Area

Re: Techs In The Atlanta Area

Post by TomRiker »

Thanks guys. That's what I was looking for.
User avatar
sacfxdx
Posts: 352
Joined: Wed Apr 11, 2018 4:25 pm
Location: North Georgia, US

Re: Techs In The Atlanta Area

Post by sacfxdx »

calcbone wrote: Thu Feb 17, 2022 11:36 am
https://www.brassinstrumentworkshop.com/

Rich Ita is top-notch.
:good:
Steve
User avatar
jbeatenbough
Posts: 330
Joined: Fri Dec 13, 2019 1:57 pm
Location: Warner Robins, Georgia

Re: Techs In The Atlanta Area

Post by jbeatenbough »

I also have had great work done on several horns by Rich. Top notch indeed.
John

Tenor:
King 2B Silvertone-DW 12CS
Shires 1Y,T47,Dual Valve-DW 6BL
Shires 7YLW screw bell, T08-25YC-DW 6BS
Kanstul 1555-DW 6BS

Alto:
Thomann TEB480L-Schilke 45B

Trumpet:
King Liberty Silvertone AB-Schilke M2C
King 600-Bach 7C
Post Reply

Return to “Modification & Repair”