Page 1 of 1
King 3b tuning crook
Posted: Sun Sep 29, 2019 7:01 pm
by DakoJack
I need one I currently have a 3b Ive been restoring and the crook has a hole in it any advice on what it would cost to buy one or have one made all advice welcome.
Re: King 3b tuning crook
Posted: Sun Sep 29, 2019 8:22 pm
by harrisonreed
https://parts.conn-selmer.com/products/ ... attachment
You might have to log in as a guest. That's where you can get parts, or have your local shop order parts from. Looks like it's pretty cheap.
Re: King 3b tuning crook
Posted: Mon Sep 30, 2019 8:31 am
by tbonesullivan
How big of a hole is it, and how did it get there? If it's a tiny hole from a dent being pushed out or a crease crack, those can usually be silver brazed closed relatively easily.
Re: King 3b tuning crook
Posted: Mon Sep 30, 2019 7:06 pm
by DakoJack
Thank you just what I was looking for.
Re: King 3b tuning crook
Posted: Mon Sep 30, 2019 7:07 pm
by DakoJack
tbonesullivan wrote: ↑Mon Sep 30, 2019 8:31 am
How big of a hole is it, and how did it get there? If it's a tiny hole from a dent being pushed out or a crease crack, those can usually be silver brazed closed relatively easily.
Pretty substantial and Im not sure how it got there it was like that when I got it picked it up mainly as a repair project.