I have a project horn with the old-style slide stockings soldered on to the inner slide. Most of the chromium plating is worn off, or perhaps it was accidentally cleaned with muriatic acid.
Roughly, what would be the cost of deplating and replating the chromium plating vs. replacing the inner slide tubes with modern ones? The tubes look to be in fair shape for an instrument that’s 70-100 years old—no obvious red rot or other holes that I can see. The old-style stockings are kind of cool, and it would be nice if they could stay.
Replace or replate inner slide tubes
-
- Posts: 1306
- Joined: Sat Mar 24, 2018 11:46 am
- Location: Vancouver WA
Replace or replate inner slide tubes
Kenneth Biggs
I have known a great many troubles, but most of them have never happened.
—Mark Twain (attributed)
I have known a great many troubles, but most of them have never happened.
—Mark Twain (attributed)
-
- Posts: 1059
- Joined: Fri Mar 23, 2018 11:33 pm
Re: Replace or replate inner slide tubes
I guess as a project you want to keep the original slide, but it seems like a better result could be had by substituting an appropriate modern slide so you can enjoy the vintage bell.
-
- Posts: 147
- Joined: Sat Apr 21, 2018 4:50 pm
- Location: Washington
Re: Replace or replate inner slide tubes
If you measure the OD of the stockings, you could perhaps find a chromed brass or nickel tube that would replace them. Most soldered-on stockings were on small-bore horns. It's conceivable that a part of a modern horn's slide other than the stocking could be substituted and soldered in place. I have quite a few modern inners with worn out stockings but excellent chrome on the legs. I'm sure most techs do.
- LeTromboniste
- Posts: 1193
- Joined: Wed Apr 11, 2018 7:22 am
- Location: Sion, CH
Re: Replace or replate inner slide tubes
Most of those old soldered-on stockings were just nickel silver, without any plating. You could always replace them with new stockings of unplated brass or nickel silver. Raw brass and/or nickel silver slides can work very well as long as the tubes are straight and well aligned and that proper care is given. They are higher maintenance, but properly cared for, they can be very good - better than many modern slides with plating wear/loss.
(Care which will be to a certain extent needed anyway on the unplated legs.)
(Care which will be to a certain extent needed anyway on the unplated legs.)
Maximilien Brisson
www.maximilienbrisson.com
Lecturer for baroque trombone,
Hfk Bremen/University of the Arts Bremen
www.maximilienbrisson.com
Lecturer for baroque trombone,
Hfk Bremen/University of the Arts Bremen
- Doug Elliott
- Posts: 3444
- Joined: Wed Mar 21, 2018 10:12 pm
- Location: Maryand
Re: Replace or replate inner slide tubes
I think it's very unlikely that tubes with soldered-on stockings would be chrome plated. More likely nickel, and it's not a big problem to get them replated. However there are several different types and processes for nickel plating and I don't know what would be best.
"I know a thing or two because I've seen a thing or two."
-
- Posts: 749
- Joined: Thu Mar 22, 2018 7:40 am
- Location: My Dungeon of Hell....Actually Texas
- Contact:
Re: Replace or replate inner slide tubes
Call Anderson Plating and see what they have to say.
Eric Edwards
Professional Instrument Repair
972.795.5784
"If you must choose between two evils, choose the one you haven't tried yet."
"Rather fail with honor than succeed by fraud." -Sophocles
Professional Instrument Repair
972.795.5784
"If you must choose between two evils, choose the one you haven't tried yet."
"Rather fail with honor than succeed by fraud." -Sophocles
- JohnL
- Posts: 1907
- Joined: Fri Mar 23, 2018 9:01 am
- Contact:
-
- Posts: 749
- Joined: Thu Mar 22, 2018 7:40 am
- Location: My Dungeon of Hell....Actually Texas
- Contact:
Re: Replace or replate inner slide tubes
Yes, had a pair of tubes done not too long ago & they came out nice!
Eric Edwards
Professional Instrument Repair
972.795.5784
"If you must choose between two evils, choose the one you haven't tried yet."
"Rather fail with honor than succeed by fraud." -Sophocles
Professional Instrument Repair
972.795.5784
"If you must choose between two evils, choose the one you haven't tried yet."
"Rather fail with honor than succeed by fraud." -Sophocles