Odd bell cover/mute used by Jimmy Cleveland

[oopyirdyy]

Does anybody happen to know what this cover is that Jimmy Cleveland is using in this photo? https://imgur.com/a/W5aHWLT

[Burgerbob]

Picture without link:

[dukesboneman]

I use something similar on my horn.
It mellows out the sound a bit seems to make everything smoother
Great for soloing

[ghmerrill]

Might be a Softone that he's taken a knife or scissors to. I have one for my bass, but if you put it completely over the bell (rather than hanging it), it's a practice mute.

https://www.amazon.com/Softone-Tenor-Tr ... 108&sr=8-7

[Doug Elliott]

That picture is from probably 30 years before Softones existed.
Looks totally homemade to me, probably made of felt, maybe a wool felt beret.

[ghmerrill]

Looks totally homemade to me, probably made of felt, maybe a wool felt beret.

That makes sense. Probably where Softone got the idea. You can in fact wear the Softone as a hat, but you look like a demented Parisian artiste.

[Posaunus]

I have a blue beret that I use the same way - but it looks too cool to cut a bunch of holes in it. Works similarly to a Softone mute, but less muffled.

[Enelson]

There are lots of pictures of Curtis Fuller using the same kind of felt bell cover and at least one YouTube clip I can think of.

[ghmerrill]

I think I have to try this beret idea. I used to have one around here for a long time, but either my wife or my daughter appropriated it at some point.

I'm really puzzled about what effect the beret has with that much space cut out of it (maybe it's really for the effect it has up close with the mic?). Last night, I tried a knit beret my wife has, and it was like there was nothing on the bell at all.

Also, I can see that recently there has been a sort of "beret inflation" (along with everything else). Still, worth ordering one from Amazon just in the interests of science.

[CalgaryTbone]

I'm pretty sure that's the same thing that a former trumpet colleague of mine used for a couple of the Gershwin solos in the orchestra rep. (American in Paris, etc.). That would imply that it was a product that was commercially available. As I remember, it sounded like a slightly more open bucket mute - sort of in between the open horn and a bucket.

Jim Scott

[ghmerrill]

I'm skeptical it's a commercial product -- unless it's a handmade commercial product. There's no uniformity of the hole shape and size, and some of the cutting is very ragged. It gives me confidence that I could produce that result with little effort.

[AtomicClock]

Somebody over at Trumpet Herald mentions:

https://www.trumpetherald.com/forum/vie ... ?p=1242317

I don't know if they're still manufactured, but for a good while you could get the Don Goldie Felt Mute. It was powder blue in color, had a logo stamped on it, the holes (I think 5 or 6) were symmetrical. Just like this one it slipped over the bell rim & held in place by a piece of elastic sewn into the felt.

The felt was just thick enough to take a bit of edge off the sound, not quite as much as a bucket mute would. No resistance, no pitch change.

Here's a picture. Holes around the edge, but not in the center.
https://reverb.com/item/71653113-vintag ... uOVylbev70

[bitbckt]

tomato has something similar in his mute lot in the classifieds section. Maybe he'd have something to say?

[ngrinder]

My softone looks like this. It allows freer access to the higher partials without back pressure while also cutting out some of the "errant" overtones that can interrupt smooth articulation. Gives better consistency and moderates volume as well.

[ghmerrill]

My Softone doesn't have any holes like that!! Or did you create those yourself? I've been thinking about that, but have decided it's probably better to keep the Softone as is (for possible use as a bucket mute) and hack up a beret instead.

[Posaunus]

My Softone doesn't have any holes like that!! Or did you create those yourself? I've been thinking about that, but have decided it's probably better to keep the Softone as is (for possible use as a bucket mute) and hack up a beret instead.

[Crazy4Tbone86]

My Softone Mute plays badly out of tune. I'm wondering it cutting some holes in it will improve the intonation.

Then again. Jimmy Cleveland's and Curtis Fuller's mutes look like Charlie Brown's Halloween costume in "It's the Great Pumpkin, Charlie Brown." If I cut holes in mine, will I end up saying...."I got a rock."

[ngrinder]

My Softone doesn't have any holes like that!! Or did you create those yourself? I've been thinking about that, but have decided it's probably better to keep the Softone as is (for possible use as a bucket mute) and hack up a beret instead.

I cut it myself. Buy two, mess with one, check out the difference in the upper register.

[ghmerrill]

My Softone doesn't have any holes like that!! Or did you create those yourself? I've been thinking about that, but have decided it's probably better to keep the Softone as is (for possible use as a bucket mute) and hack up a beret instead.

I cut it myself. Buy two, mess with one, check out the difference in the upper register.

My thinking:

• Cost of Softone = ~ $60
• Cost of cheap beret = < $10 (or ~ $0 if found at secondhand store)
• Experimentation cost differential to achieve approximately same learning result >= $50

Plus I'm also thinking that the beret may have other advantages and produce what I'm looking for more closely.

Initial project plan: Drive to town and see if they have any berets at Goodwill store. On the other hand, it's true that I'm not using the Softone for anything.

[Posaunus]

I'm ready to blow some blues.

Blue felt beret (very inexpensive).
Blue plunger (inexpensive).
Olds R15 Recording with 8" Re-O-Loy red brass bell (priceless).

[EriKon]

I love how Doug's mouthpiece design matches with the braces of the slide!

[Posaunus]

I love how Doug's mouthpiece design matches with the braces of the slide!

It not only looks great, it plays beautifully (in my opinion) on this wonderful trombone.
D3(Olds) Shank (2022*) / ST D* Cup / ST 99 Rim (though I'd also like to try an ST 100 - anyone have one to sell?

[Horndon]

Search Amazon for "cloth bowl covers." They're cheap enough to get a several to experiment with different cutout patterns.

[ghmerrill]

I cut holes in my Softone, and it sounds great. But it's pretty much of a pain to put on and get off -- especially in a hurry.

[gregwaits]

Does anybody happen to know what this cover is that Jimmy Cleveland is using in this photo? https://imgur.com/a/W5aHWLT

If I’m not mistaken, that’s just a woolen beret that he modified by cutting holes. I have one I did the same with.

[Posaunus]

As well as an authentic (but rather expensive) Softone mute, I also have successfully muted with an inexpensive woolen beret (thank you eBay), which doubles as a (slightly) less geeky hat if you are caught in the rain (or get invited to a French soirée). No holes required to get a nice muted sound.