That odd mouthpiece that came in the case...

[JohnL]

If you've bought many used trombones, you've also ended up with a collection of mouthpieces that just sort of "came along for the ride". Usually, it's just the OEM mouthpiece or some common brand, like Schilke, Bach, or Denis Wick - but sometimes it's something out of the ordinary...

Over the years, I've acquired a Parduba double cup, a Rudy Mück cushion rim, an ivory cup Olds from around 1930, and a couple of Roe Plimpton custom bass trombone 'pieces from the late 1940's.

What have you ended up with that you didn't actually set out to buy?

[AtomicClock]

It was a friend's purchase, who then gave me the mouthpiece.
Miraphone PO 05
Maybe like a 12c, but with an extra-long shank.

[Burgerbob]

I recently found an Urbie Green Jet Tone in a case. Go figure, it's nearly a perfect match for my bass trumpet.

[Posaunus]

How about:
• Jerome Callet Magnum 7B
• DiOrio C 980
• Chris Kratt C24
• Ludwig
• Martin 1

[Kevbach33]

In a Holton 168 case, a Conn 3B that I later donated to my high school since they have a 71H.

The stock 89 is a pretty odd piece itself.

[JeffBone44]

I was given a Shires 4MD when I bought my horn. I never really used it, but I tried it the other day, and it’s pretty good. Not my ideal rim size though. It's described as being comparable to a Bach 4 rim, with a cup depth in between a 4GS and 4G.

[modelerdc]

An old Benge I bought cheap came with a King 4G. Didn't think much of it but I put the King 4G into my regular horn just to test and it immediately started working for me. A good sized rim, a shape that locks in without fatigue, and for reasons I can't explain, it plays with more center, focus color than most 4Gs, most of which I tend to sound too dark on. The King 4G still has the breadth of sound you expect from a 4G, but for me plays like a tenor trombone mouthpiece instead of a small bass. It replaced a slew of mouthpieces which were close but no cigars.

[afugate]

William Frank trombone mouthpiece. Two numbers on it. 3 and 2. Small shank. Never seen anything like it.

--Andy in OKC

[TomRiker]

Hammond 11m skeleton-ized small shank that came with a Bach 36BC. Kind of funny because it's the size rim and maybe even cup that I would have ordered to try on the horn if I was going to buy a Hammond. The shank goes in a little too deep, but some plumbers tape fixes that. I kind of like it. It is very efficient and not like anything else I own. I don't use it all the time but it's fun to play and great to get back into shape if I've been off the horn for a few (or a lot of) days.

[Mamaposaune]

I bought an Olds TIS with the bear on the bell, and it came with a NY Bach 18 mouthpiece. Thinking it was cool but not really usable, I decided to have it re-plated and set it aside.
I use the Olds from time to time, and have used mouthpieces that are comfortable for me, such as a Wick 6BS.
When asked to play an alto part in a piece with orchestra/choir (definitely out of my comfort zone) I resorted to the Bach 18.
It was magical! The previous owner must have known his stuff, because it really makes the Olds sing.
And surprisingly it does not feel as small as I thought it would.

[pjanda1]

This old NY Bach 7 that I used happily for years has been by FAR the neatest. In terms of surprisingly good mouthpieces that commonly show up in cases, Yamaha 48 small shank. I have a shallowish one I love. Conn 3s are pretty neat, though I've never really used one for any length, as I only use small bores for jazz and tend to focus on shallower things.

Paul

[calcbone]

A NY 7 can be a nice piece. That’s a really cool find!

I have one that I use when I want a nice “velvety” sound on my small horns (3B, Bach 8). In fact I’m using it tomorrow—my daughter’s piano teacher asked me to play a Christmas song with her at the end of their winter recital

[davdud101]

I can't remember where it came from - but some horn I paid maybe $60-$150 for in the last 5 years netted me a cool gold plated Remington Connstellation mouthpiece. It honestly would be the perfect mouthpiece for me if it weren't for the mismatched taper/gap that throws the intonation and overall sound/feel balance way off. Otherwise it's got a lovely, fluffy warm tone.

[jacobgarchik]

2 years ago bought a Conn trombone from a guy on FB for $200. Late 50s 6h. He delivered it to me in Brooklyn in his pickup truck.
His ad didnt mention a mouthpiece, but it Ccame with a Mt Vernon 6 1/2al. Love the trombone, not sold on the mouthpiece, but keeping it around; maybe I just haven't found the perfect horn match for it.

[GabrielRice]

A former student found a no-name mouthpiece in a practice room at Boston University and gave it to me. It's more or less the size of a 2G with a wider rim, a more open throat, and a heavier blank. I gave it to a former tenor student for bass trombone doubling. It beat out a Greg Black Ray Premru 2G copy and a couple of other small bass pieces in playtesting.

[sf105]

Beat-up Conn 18H (TIS small tenor) came with a NY Bach Jazz Medium. I have no idea what it's equivalent to but it works really well.

[JohntheTheologian]

When I bought my Mack Brass euphonium a few years ago, a no-name mp came with it. It is somewhere between a 6 1/2 AL and 5G rim size with a deeper cup. If I ever have an opportunity to compare it with a Schilke 51D, I'm guessing it might be close. I've used it a few times on my large bore, but never gravitated towards it. I wipe my rims off with a microfiber cloth every time I play and I've noticed that it seems to collect a film from my facet that other mps don't seem to.

I mostly play Marcinkiewicz mps on my small bore, large bore and bass, but I never found a Marck that worked well on my euphonium, where I used a CKB (same as UMI and later King) 5G that is a bit deeper than a Bach 5G and works well.

[JohntheTheologian]

When I bought my Mack Brass euphonium a few years ago, a no-name mp came with it. It is somewhere between a 6 1/2 AL and 5G rim size with a deeper cup. If I ever have an opportunity to compare it with a Schilke 51D, I'm guessing it might be close. I've used it a few times on my large bore, but never gravitated towards it. I wipe my rims off with a microfiber cloth every time I play and I've noticed that it seems to collect a film from my facet that other mps don't seem to.

I mostly play Marcinkiewicz mps on my small bore, large bore and bass, but I never found a Marck that worked well on my euphonium, where I used a CKB (same as UMI and later King) 5G that is a bit deeper than a Bach 5G and works well.

[baileyman]

My buddy who knew frank Rosolino says when Frank got on the Kenton band he was issued a new 6h, mouthpiece included. So that's what he played.

[Posaunus]

My buddy who knew frank Rosolino says when Frank got on the Kenton band he was issued a new 6h, mouthpiece included. So that's what he played.

What mouthpiece was provided with these new 6Hs?

[imsevimse]

I once got a Bach 3C trombone mouthpiece. Usually a Bach 3C means it's a trumpet mouthpiece and I have never seen a Bach 3C for trombone since. It might have been a special order. It played horrible for me. Bad intonation so I let it go with another horn I sold. The buyer already had a mouthpiece and didn't mind he got a strange piece.

/Tom