Forgive my ignorance, I know this has been talked about alot but something still isn't clicking for me. I have a Shires Q, and my goal is to delacquer the whole thing and do a scratch finish with sandpaper or the like. My question is what actually is the lacquer? When I put the horn in a hot bath, I was able to get most of the thin outer layer to come off; is that the lacquer? The reason I ask is because in the spots where the lacquer came off the horn is still shiny. If I successfully removed the lacquer, what are the steps between shiny and what I think of as raw brass? Is the answer that they make the raw brass shiny and lacquer over it to keep it that way, because over time hands will turn the shiny raw brass into the not-so-shiny look I think of as wear?
Thanks in advance!
Lacquer
-
- Posts: 1880
- Joined: Mon Mar 02, 2020 6:18 am
Re: Lacquer
A horn is buffed, then lacquered, the lacquer doesn’t make the horny shiny, buffing/polishing does. Lacquer just prevents the brass from oxidizing. That’s why wax works too, there just needs to be a barrier between the air and the brass.
-
- Posts: 358
- Joined: Fri Mar 30, 2018 7:03 am
- Location: Copenhagen, Denmark
- Contact:
Re: Lacquer
Just wait four weeks, and it will not be shiny any more. ..
- Burgerbob
- Posts: 5137
- Joined: Mon Apr 23, 2018 8:10 pm
- Location: LA
- Contact:
Re: Lacquer
Exactly this. A horn is buffed and polished to a high shine, then a thin layer of clear stuff is applied so it stays shiny. You're removing that layer, which for the moment reveals the just recently protected shiny brass.
Give it some time and the brass will start to get less shiny.
Aidan Ritchie, LA area player and teacher
- Mv2541
- Posts: 557
- Joined: Thu Mar 29, 2018 10:07 am
- Location: New Jersey
Re: Lacquer
Thanks everyone for the replies and clearing things up for me!
I'll post pics of the finished product sometime.
I'll post pics of the finished product sometime.
Software Developer/Educator
JP Rath 236 - XT L101 C+/AS
Bach LT16M - XT L101 C+/D3
Bach 36BO - XT L101 E/E4
Edwards T396 - XT L101 F+/G8
Courtois 502 - LB L114 L/L8
JP Rath 236 - XT L101 C+/AS
Bach LT16M - XT L101 C+/D3
Bach 36BO - XT L101 E/E4
Edwards T396 - XT L101 F+/G8
Courtois 502 - LB L114 L/L8
-
- Posts: 1034
- Joined: Wed May 02, 2018 9:20 pm
Re: Lacquer
Just be aware that unless the horn is lacquered again after the scratch brush is applied, it will darken and tarnish.
Matthew Walker
Owner/Craftsman, M&W Custom Trombones, LLC, Jackson, Wisconsin.
Former Bass Trombonist, Opera Australia, 1991-2006
Owner/Craftsman, M&W Custom Trombones, LLC, Jackson, Wisconsin.
Former Bass Trombonist, Opera Australia, 1991-2006